Household oxygen generator

usage

Step 1 install the main engine on the floor or hang it on the wall, and install the gas flow filter.

Step 2 nail the oxygen supply gusset plate on the wall or support as required, and then hang the oxygen supply.

Step 3 connect the oxygen outlet interface of the oxygen supplier with the oxygen delivery pipe, and connect the 12V power line of the oxygen supplier with the 12V power line of the host.

Step 4 plug the 220V power line of the host into the wall socket, and the red light of the oxygen supply is on.

Step 5 add purified water to the designated position in the humidification cup, install it on the oxygen outlet of the oxygen supplier, and then connect the oxygen delivery pipe.

Step 6 press the start button of the oxygen supplier, the green indicator light will be on, and the oxygen generator will start to enter the working state.

Step 7 adjust the flow to the required position according to the doctor's advice.

Step 8 hang the nasal intubation or wear the mask to inhale oxygen according to the packaging instructions of the oxygen mask or nasal straw.

Use attention

1. Molecular sieve oxygen generator is only suitable for use in a certain space to avoid contact with some chemical agents in medicine.

2. In the process of using the oxygen generator, it is necessary to prevent close contact with the external air and avoid the influence of impure oxygen on the treatment effect.

3. When the oxygen generator works, it shall be placed in the center of the room as far as possible, or the distance from the wall and other surrounding objects shall be greater than 20cm.

When not in use for a long time, please cut off the power supply, pour out the water in the humidification bottle, wipe the surface clean and cover it with a plastic cover.

From the network